Extra Thin Glass Capillary Tubes/Micro Pipettes TLC Spotting 0.2-0.25mm ID x 100mm 500 or 1500/pk (1500)

1. Extra thin 1500 per pack capillary tubes, 0.2-0.25 mm inner diameter, 0.3-0.35 mm outer diameter, 100mm length. Non-calibrated, non precision tubes. Both ends open. 2. The extra thin diameter of these tubes makes it especially suitable for spotting aluminum or plastic backed type of TLC plates that usually have thinner silica coating than glass plates. Compared to thicker tubes, it avoids the spot from getting too large. It also saves your effort of splitting one draw-volume into spotting several times, needing to blow-dry or air-dry in between. 3. Convenient packaging with 1.5mm diameter hole on cap for easy tube drawing without need to open the cap or keeping it open all the time. 4. As shown in photos, approximate spotting volume as tested for water is 65mm x (0.12mm)² x 3.14 = 3µL. Testing method used is having the tube at a straight up angle and allowing the liquid to keep on climbing until it stops. If spotted at a tilted angle the draw volume can be larger, if reducing the spotting time the volume will be smaller. Most organic solvents will climb up to a lesser height, and have a smaller draw volume than water. On average about half the amount.-------------------More tube sizes available. 0.3mm ID 0.5mm OD tubes 0.5mm ID 0.75mm OD tubes 1.4mm ID 1.7mm OD large capillary tubes 1.4mm ID 1.7mm OD melting point tubes

• Extra thin 1500 per pack capillary tubes, 0.2-0.25 mm inner diameter, 0.3-0.35 mm outer diameter, 100mm length. Non-calibrated, non precision tubes. Both ends open.
• The extra thin diameter of these tubes makes it especially suitable for spotting aluminum or plastic backed type of TLC plates that usually have thinner silica coating than glass plates. Compared to thicker tubes, it avoids the spot from getting too large. It also saves your effort of splitting one draw-volume into spotting several times, needing to blow-dry or air-dry in between.
• With a large quantity of 1500 tubes, at a highly affordable price (only $1.67/100 tubes), one can say goodbye to reusing capillary tubes in TLC spotting (or any other application), other than perhaps using both ends once each. Save the time, effort, washing solvent and risk of contamination, and focus on more important aspects of your research!
• Convenient packaging with 1.5mm diameter hole on cap for easy tube drawing without need to open the cap or keeping it open all the time.
• As shown in photos, approximate spotting volume as tested for water is 65mm x (0.12mm)² x 3.14 = 3µL. Testing method used is having the tube at a straight up angle and allowing the liquid to keep on climbing until it stops. If spotted at a tilted angle the draw volume can be larger, if reducing the spotting time the volume will be smaller. Most organic solvents will climb up to a lesser height, and have a smaller draw volume than water. On average about half the amount.